ShaggyDog
11-03-2002, 01:48 AM
Greetings!
This is my first post here. I've been reading this forum and Thunder's since I stumbled across them a month ago. All I have to say is YOU GUYS ROCK!!! I've been blown away by the openness and helpful attitude you guys have.
A little history... I tried PEing last Feb. When I found a hacked link to a PE site. I was doing fine for 2 weeks until I did the most monumentally stupid thing I've ever done to my body. I applied Nair to my shaft and balls. PAIN DELUXE WITH EVERYTHING ON IT!!! I was bed-ridden with pain the next day and it took 2-3weeks to heal. I've learned my lesson and now tweeze the shaft. I may eventually start tweezing the balls.
So I'm going to get back into PEing.
Starting measurements as of Oct. 29 2002
Bpel 7.375"
Nbpel 6.625"
Eg 6"
My shaft is thinner at the base (haven't measured there) it expands to 6" mid-shaft then tapers off some before the head.
My goal is:
Nbpel 8"
EG 7"
I use nbpel here because I want those 8" to be visible. I also want to shape the shaft so it's totally cylindrical. I thought using some girth exercise on only the thinner parts might do that. I've been reading the boards but I haven't found an answer yet.
I plan to start with this routine:
5 min washcloth soaked with hot water wrap
5 min manual stretch (60 sec at a time in 5 directions)
10 min jelq (200 3 sec strokes)
5 min kegels (50 5 sec holds)
shower
And work it up over two weeks to:
5 min washcloth soaked with hot water wrap
25 min manual stretch (5x60 sec at a time in 5 directions)
25 min jelq (500 3 sec strokes)
20 min kegels (200 5 sec holds)
shower
From then on I'll add in whatever looks good. I'm seriously considering DLD blasters. And I'll have to research squeezes and other girth techniques to reach my girth and shape goals. Any one know what I should use?
So vets am I on the right track? Is it too fast? Whatever you have to say, I'd like to thank you for it in advance.
This is my first post here. I've been reading this forum and Thunder's since I stumbled across them a month ago. All I have to say is YOU GUYS ROCK!!! I've been blown away by the openness and helpful attitude you guys have.
A little history... I tried PEing last Feb. When I found a hacked link to a PE site. I was doing fine for 2 weeks until I did the most monumentally stupid thing I've ever done to my body. I applied Nair to my shaft and balls. PAIN DELUXE WITH EVERYTHING ON IT!!! I was bed-ridden with pain the next day and it took 2-3weeks to heal. I've learned my lesson and now tweeze the shaft. I may eventually start tweezing the balls.
So I'm going to get back into PEing.
Starting measurements as of Oct. 29 2002
Bpel 7.375"
Nbpel 6.625"
Eg 6"
My shaft is thinner at the base (haven't measured there) it expands to 6" mid-shaft then tapers off some before the head.
My goal is:
Nbpel 8"
EG 7"
I use nbpel here because I want those 8" to be visible. I also want to shape the shaft so it's totally cylindrical. I thought using some girth exercise on only the thinner parts might do that. I've been reading the boards but I haven't found an answer yet.
I plan to start with this routine:
5 min washcloth soaked with hot water wrap
5 min manual stretch (60 sec at a time in 5 directions)
10 min jelq (200 3 sec strokes)
5 min kegels (50 5 sec holds)
shower
And work it up over two weeks to:
5 min washcloth soaked with hot water wrap
25 min manual stretch (5x60 sec at a time in 5 directions)
25 min jelq (500 3 sec strokes)
20 min kegels (200 5 sec holds)
shower
From then on I'll add in whatever looks good. I'm seriously considering DLD blasters. And I'll have to research squeezes and other girth techniques to reach my girth and shape goals. Any one know what I should use?
So vets am I on the right track? Is it too fast? Whatever you have to say, I'd like to thank you for it in advance.